Segment moulds
Formworks for bridge piers and headers
Euroform
TUNNEL LINING SOLUTIONS
Herrenknecht Euroform
Euroform realises moulds both for fixed installations and carousel systems, for all types of tunnel segments and for each tunnel ring configuration. All the formworks are designed for a simple, safe and durable use. The regulation system that characterises the Euroform segment moulds enables full compliance with the closest tolerances.
Carousel plants
When it is necessary to make the production of the tunnel segments regular, Euroform provides carousel automated systems. The carousel system permits to obtain precise and constant execution times for each task thanks to high-efficiency cycles. The carousel system also allows for a reduction in required personnel, a more efficient use of space and it increases the levels of safety.
TAILOR-MADE Formworks for conventional tunnelling
Each tunnel has its diameter, section profile and geological composition; in order to get the maximum precision in the lining of each of them, Euroform gives the solution that best suits project requests thanks to an extensive portfolio of formworks.
Bypass, niche and collar formworks
Slab formwork
Service gantries
The formworks for bridge piers and headers are designed to speed up the operations of molding and demolding by a modular system of interconnected shutters.
Segment handling devices
According to the customer's needs, Euroform supplies every type of equipment for the handling of the tunnel segments in production plants.
Special equipment
Each project has its own peculiarities that require special solutions. Also in this case, Euroform responds to customer requests by providing all the necessary.
Segment demolding and tilting clamps
Segment tilting tables
Multi-segment transfer trolleys
Vacuum segment handling devices
Concreting buckets
Concrete distributor with vibrating screed
Steam production plant
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of the vault quick and precise even for tunnels of considerable length. It is indeed not necessary to provide anchors to the ground or on the quayside and, therefore, it simplifies mold and demold operations.
Self-supporting formwork
The self-supporting tunnel formwork reduces the transversal displacement during the pouring via the anchors at the foot. The anchor can be made by tyloops on the quay or by a stopping system on the ground.
Fullround formwork
The fullround is a whole circular section tunnel formwork, composed of several interconnected longitudinal sectors. The form carrier demolds the rear sector, carries it forward and re-molds it ahead while the front ones are still molded and under pouring.
Euroform Polyradial system for variable cross section tunnels
Invert formwork
The same modular tunnel formwork can be used for the lining of different tunnels with different cross sections. Thanks to section profile radii ranging from 4.3 m to 8.9 m, the «E.P.» system offers a great versatility which results also into a high reduction in loading, transport and storage costs.
The formwork for tunnel bypass is characterized by a self-propelled transport system that guarantees high manoeuvrability and a rapid transfer from one cast to the next. Niche and collar tunnel formworks are easy to install and can be supplied with fast handling systems.
The slab tunnel formwork may have single or multiple interconnected tables configuration, so that it is possible to realise pourings of considerable length without waiting for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type and, if required, it could be self-launching.
The membrane gantry can be equipped with a hydraulic lifting system for an easy and safe installation of waterproof membranes. The curing gantry gives direct control of temperature and humidity values with continuous data recording. The reinforcement gantry makes safe and easy the positioning of the reinforcing bars with reduced staffing.
Euroform designs and manufactures high quality formworks and service equipment for the lining of tunnels made either with TBMs or drill and blast method. Accuracy in planning and design, in manufacturing and adjusting the forms, as well as in the audit of the final product, permits us to achieve the highest standards of quality and precision.
Privacy Policy
EN
IT
Euroform gantry for installation of waterproof membrane with hydraulic lifting system
segment moulds, Conventional formworks and service equipment for precise tunnel lining
Segment moulds
Formworks for bridge piers and headers
TUNNEL LINING SOLUTIONS
Euroform realises moulds both for fixed installations and carousel systems, for all types of tunnel segments and for each tunnel ring configuration. All the formworks are designed for a simple, safe and durable use. The regulation system that characterises the Euroform segment moulds enables full compliance with the closest tolerances.
Carousel plants
When it is necessary to make the production of the tunnel segments regular, Euroform provides carousel automated systems. The carousel system permits to obtain precise and constant execution times for each task thanks to high-efficiency cycles. The carousel system also allows for a reduction in required personnel, a more efficient use of space and it increases the levels of safety.
TAILOR-MADE Formworks for conventional tunnelling
Each tunnel has its diameter, section profile and geological composition; in order to get the maximum precision in the lining of each of them, Euroform gives the solution that best suits project requests thanks to an extensive portfolio of formworks.
Bypass, niche and collar formworks
Slab formwork
The formworks for bridge piers and headers are designed to speed up the operations of molding and demolding by a modular system of interconnected shutters.
Segment handling devices
According to the customer's needs, Euroform supplies every type of equipment for the handling of the tunnel segments in production plants.
Special equipment
Each project has its own peculiarities that require special solutions. Also in this case, Euroform responds to customer requests by providing all the necessary.
Segment demolding and tilting clamps
Segment tilting tables
Multi-segment transfer trolleys
Vacuum segment handling devices
Concreting buckets
Concrete distributor with vibrating screed
Steam production plant
Self-supporting formwork
The self-supporting tunnel formwork reduces the transversal displacement during the pouring via the anchors at the foot. The anchor can be made by tyloops on the quay or by a stopping system on the ground.
Fullround formwork
The fullround is a whole circular section tunnel formwork, composed of several interconnected longitudinal sectors. The form carrier demolds the rear sector, carries it forward and re-molds it ahead while the front ones are still molded and under pouring.
Euroform Polyradial system for variable cross section tunnels
Invert formwork
The same modular tunnel formwork can be used for the lining of different tunnels with different sections. Thanks to section profile radii ranging from 4.3 m to 8.9 m, the «E.P.» system offers a great versatility which results also into a high reduction in loading, transport and storage costs.
The formwork for tunnel bypass is characterized by a self-propelled transport system that guarantees high manoeuvrability and a rapid transfer from one cast to the next. Niche and collar tunnel formworks are easy to install and can be supplied with fast handling systems.
The slab tunnel formwork may have single or multiple interconnected tables configuration, so that it is possible to realise pourings of considerable length without waiting for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type and, if required, it could be self-launching.
Service gantries
The membrane gantry can be equipped with a hydraulic lifting system for an easy and safe installation of waterproof membranes. The curing gantry gives direct control of temperature and humidity values with continuous data recording. The reinforcement gantry makes safe and easy the positioning of the reinforcing bars with reduced staffing.
Euroform
Euroform designs and manufactures high quality formworks and service equipment for the lining of tunnels made either with TBMs or drill and blast method. Accuracy in planning and design, in manufacturing and adjusting the forms, as well as in the audit of the final product, permits us to achieve the highest standards of quality and precision.
Privacy Policy
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of the vault quick and precise even for tunnels of considerable length. It is indeed not necessary to provide anchors to the ground or on the quayside and, therefore, it simplifies mold and demold operations.
IT
EN
segment moulds, Conventional formworks and service equipment for precise tunnel lining
Formworks for bridge piers and headers
Euroform
TUNNEL LINING SOLUTIONS
Euroform realises moulds both for fixed installations and carousel systems, for all types of tunnel segments and for each tunnel ring configuration. All the formworks are designed for a simple, safe and durable use. The regulation system that characterises the Euroform segment moulds enables full compliance with the closest tolerances.
Carousel plants
When it is necessary to make the production of the tunnel segments regular, Euroform provides carousel automated systems. The carousel system permits to obtain precise and constant execution times for each task thanks to high-efficiency cycles. The carousel system also allows for a reduction in required personnel, a more efficient use of space and it increases the levels of safety.
TAILOR-MADE Formworks for conventional tunnelling
Each tunnel has its diameter, section profile and geological composition; in order to get the maximum precision in the lining of each of them, Euroform gives the solution that best suits project requests thanks to an extensive portfolio of formworks.
Bypass, niche and collar formworks
Slab formwork
Service gantries
The formworks for bridge piers and headers are designed to speed up the operations of molding and demolding by a modular system of interconnected shutters.
Segment handling devices
According to the customer's needs, Euroform supplies every type of equipment for the handling of the tunnel segments in production plants.
Special equipment
Each project has its own peculiarities that require special solutions. Also in this case, Euroform responds to customer requests by providing all the necessary.
Segment demolding and tilting clamps
Segment tilting tables
Multi-segment transfer trolleys
Vacuum segment handling devices
Concreting buckets
Concrete distributor with vibrating screed
Steam production plant
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of the vault quick and precise even for tunnels of considerable length. It is indeed not necessary to provide anchors to the ground or on the quayside and, therefore, it simplifies mold and demold operations.
Self-supporting formwork
The self-supporting tunnel formwork reduces the transversal displacement during the pouring via the anchors at the foot. The anchor can be made by tyloops on the quay or by a stopping system on the ground.
Fullround formwork
The fullround is a whole circular section tunnel formwork, composed of several interconnected longitudinal sectors. The form carrier demolds the rear sector, carries it forward and re-molds it ahead while the front ones are still molded and under pouring.
Euroform Polyradial system for variable cross section tunnels
Invert formwork
The same modular tunnel formwork can be used for the lining of different tunnels with different cross sections. Thanks to section profile radii ranging from 4.3 m to 8.9 m, the «E.P.» system offers a great versatility which results also into a high reduction in loading, transport and storage costs.
The formwork for tunnel bypass is characterized by a self-propelled transport system that guarantees high manoeuvrability and a rapid transfer from one cast to the next. Niche and collar tunnel formworks are easy to install and can be supplied with fast handling systems.
The slab tunnel formwork may have single or multiple interconnected tables configuration, so that it is possible to realise pourings of considerable length without waiting for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type and, if required, it could be self-launching.
The membrane gantry can be equipped with a hydraulic lifting system for an easy and safe installation of waterproof membranes. The curing gantry gives direct control of temperature and humidity values with continuous data recording. The reinforcement gantry makes safe and easy the positioning of the reinforcing bars with reduced staffing.
IT
EN
E uroform designs and manufactures high quality formworks and service equipment for the lining of tunnels made either with TBMs or drill and blast method. Accuracy in planning and design, in manufacturing and adjusting the forms, as well as in the audit of the final product, permits us to achieve the highest standards of quality and precision.
SEGMENT MOULDS
Privacy Policy
segment moulds, Conventional formworks and service equipment for precise tunnel lining